Adding Glass Door Cabinet


Many people spend a good part of the day in the kitchen cooking, eating or even doing homework, and a small space can be frustrating. There are some tricks that can make your kitchen look larger. One is replacing cabinet doors with glass door cabinet wooden to an airy place, expanded sense. Measure the length and width of the cabinet panel you will be removing the glass insert. Subtract 1 inch to each measurement to allow for framing.

Measure from each edge where the panel begins at the front and mark it with a grease pencil. Use a right to connect all the marks to form the whole shape panel edge. Take a 2 inch hole in the center of each panel shown from the rear. Cut each panel with a puzzle to adding glass door cabinet.

Measure the length and width inside the openings and add 2 inches each. Cut the molding picture frame half-inch. Miter both ends of each molding of 45 degrees, 1 inch at each end, with a miter box and hacksaw. Sand the edges of the trim if necessary to remove chips. Install the glass door cabinet as he did the first one. Leave doors dry overnight. Reinstall your cabinet doors.

Comments are closed.