Installing the Components of Folding Closet Doors

0

The bifold doors are the most commonly used as closet doors. They are attractive and not take up much space. The folding closet doors system comprises a pivot support in the ground, a track assembly in the top and handles. Measure the width of the opening of the cabinet. If this opening is greater than 91.44 cm, you will need two folding doors. Subtract 0.64 cm measurement and divide by two, if you are installing two doors. Cut each track of this length with a hacksaw.

Mark the center of the top of the cabinet with a pencil. Connects the two parts of the track along with the connecting plate track. Adjusts the pivots into the holes drilled at the top of the main panels of the bifold doors. Hit them gently with a hammer. Place the guide pins into the holes in the folding closet doors and guides hit them too.

Locates the jamb bracket on the floor directly below the upper pivot bracket. Drill pilot holes in the folding closet doors frame and the floor before fixing the jamb bracket with screws. Push the guide in the middle of the track. Measure from the floor 91.44 cm. Punch a hole in the door on the mark you just made.

Comments are closed.